Sideways GT3

from 01/01/2025

Eligible cars

Cars must remain standard apart from the following allowable changes:

Front/rear tyres can be glued and trued.
Standard rear tyres can be replaced with BRM Supergrip 15 shore/PCS F15 20mm x 11mm.
Front/rear track can be extended to 65mm max when measured to the outer edges of the tyres.
Standard front wheels can be replaced with Slot.it 17.3mm x 8.2mm aluminium wheels. (Magnesium not allowed)
Rear spoiler can be replaced with rubber version.
Both painted and labelled versions of the ‘Baby Raptor’ motor are permitted.
Motor mount can be attached to the chassis using three or more of the provided mounting points.
Chassis stiffening blocks can be fitted in the provided mounts if desired.
Axles can be replaced with any solid steel/stainless steel items.
Standard axle bearings can be replaced with any plain bronze 0mm offset equivalent. Ball bearings are not permitted.
Grub screws as supplied with the car can be used to adjust the front axle ride height/vertical travel.
Axle spacers/stoppers are permitted to achieve desired track width.

The following components are deemed free choice: axle spacers/stoppers, body/motor mount screws, grub screws, guide screw, lead wire, braid, eyelets.