7/4/22 to 21/7/22
Eligible cars: Any 1/32 hard bodied GT-type model that is or has been available in the UK. The car used must have had a 1/1 road car version made at some time in its history.
Specification of car is free choice apart from the following restrictions:
- Motor RPM must not exceed 23,000rpm@12v (factory figure)
- Front/rear track can be extended to the width of the body. However, no part of the wheels/tyres should be visible when the car is viewed from above.
- Whilst the choice of front/rear wheels is free, the minimum diameter should not be less than 15.8mm. Cosmetic wheel inserts can be omitted.
- Unpainted or clear coated bodies are not permitted.
- Clear Lexan interior must at the very least be painted plain black.
- Although lightweight Lexan body parts are permitted, all major body components should be present, be they standard parts or lightweight replacements. This includes but is not limited to: full interior with driver (must fully conceal all interior parts of chassis), full set of windows, headlight assemblies (including headlight bowl), rear spoiler/wing/aerofoil.
- Bodyshell and chassis must be matching parts, i.e., a Slot.it McLaren must be fitted with a Slot.it McLaren chassis. 3D printed chassis are permitted, but again must be specifically designed for the bodyshell being used.