Molesey GT - 2022

Molesey GT – Rules and eligible models.

  • Allowed
    • Any 1:32 scale hard-bodied GT-type slot car that is or was commercially available in the UK from the following manufacturers:
      • Avant Slot
      • Black Arrow
      • Carrera
      • Fly/Flyslot/GB-Track/Slotwings
      • MrSlotcar.ca
      • Ninco
      • NSR
      • Policar
      • ProSlot
      • Scaleauto
      • Scalextric
      • SCX
      • Sideways
      • Slot.it
      • Thunderslot
  • Country of origin
    • All parts fitted to the car must be or have been commercially available in the UK.
  • Axles
    • Free choice.
  • Bearings
    • Free choice.
  • Body
    • Must not be modified.
    • Must be fully painted.
    • Must display a race number clearly visible on the exterior of the body.
  • Body interior/driver tray
    • The original interior/driver tray may be modified or replaced with a lightweight alternative.
    • The interior/driver tray must include a driver helmet, fitted in an appropriate position.
  • Body and Chassis
    • Must be produced by the same manufacturer.
  • Chassis
    • Must be plastic.
    • Must not be modified.
    • Must be originally designed for the body to which it is fitted.
    • All stiffness grades allowed.
  • Gears
    • Pinion
      • Free choice.
    • Spur/Crown
      • Free choice.
  • Guide
    • Free choice.
  • Motor
    • Any motor with a manufacturer specification of 23,000rpm or lower is allowed.
  • Motor mount (where applicable)
    • Free choice.
    • Must remain unmodified except where it is necessary to remove a small amount of material to prevent stress fractures when installing and removing the motor.
  • Motor orientation
    • The motor may be mounted as an inline, angle-winder or side-winder, but must be in the orientation as originally intended for the chassis to which it is fitted.
    • If the chassis and/or motor mount is designed to accept multiple motor orientations, any of those for which it is designed may be used.
  • Suspension
    • May be fitted.
    • Free choice of manufacturer.
  • Track
    • Front and rear
      • Wheels and tyres must not exceed the limits of the body when viewed from above when either axle is moved to its extreme left or right positions.
  • Tyres
    • Front – Any black tyre.
      • May be glued/trued/glazed.
    • Rear – Any black rubber or synthetic rubber tyre.
      • May be glued and trued.
      • Silicone and sponge tyres are prohibited.
  • Weight
    • Additional ballast may be used.
    • Must be securely fixed.
    • Must fit within the confines of the body when the body is fitted to the chassis.
  • Wheels
    • FrontFree choice, but with a minimum diameter of 15.8mm.
    • Rear – Free choice, but with a minimum diameter of 15.8mm.
  • Wheel inserts
    • Are not required.
  • Sundries
    • All other components are free choice – e.g. braids, wires, screws, spacers, glues and lubricants.
Close Menu